TECNO AD10 FIRMWARE FLASH FILE STOCK ROM WITHOUT PASSWORD

 

On This Page, We Will Share The Official Firmware File Also Known As Stock Rom For The Tecno AD10. You Can Use This Firmware To Upgrade Or Downgrade Your Device By Following This Guide, To Flash The Firmware File On Tecno AD10, You Can Simply Download The Link Given Below And Follow The Instruction To Flash




Tecno AD10 Flash File/Firmware Can Solved Any Kinds Of Tecno AD10 Software Related Problem On Your Tecno AD10 Android Device. This Tecno AD10 Flash File Will Resolved Frp Lock Comes After Hard Reset, Unfortunately System App Has Stopped, After Flash Fastboot Mode, Pin Lock Password Lock Pattern Privacy Lock, Lcd Display White Or Blank After Flash Wrong File And Other Reason, Automatically Restart The Phone, Phone’s Lights Are Late Automatically Install The Application, Imie Null, Base Band Unknown, Ram Cache Working Very Slowly, Dead Recovery, Dead After Flash Wrong File, Hang On Logo, Tools Da Not Match Or Secure Boot Not Accept Fix

 

 


 

 

Here You Will Find All The Latest Tecno AD10 Firmware For Tecno AD10. If You Are Looking For Tecno AD10 Stock Rom Firmware, Then You Are On The Right Page, Before Downloading Make Sure Your Device Is Tecno AD10,Then Flashing The Below Stock Firmware Can Brick Your Device, The Tecno AD10 Firmware Helps In Unbricking The Device, Updating The Device To Latest Android Version Revert The Device Back To Stock, Fix Boot Loop Issues And Several Other Issues On Your Device




Note: Flashing The Rom Will Erase All Your Personal Data Including Storage. So We Advice You To First Make A Complete Backup Of Your Phone, Please Do Carefully, We Are Not Responsible For Any Damage To Your Device, Must Backup Nvrm Using This Guide Before Doing Anything, Ensure That Your Device Atleast 50% Charge During Flashing Process To Prevent Accidental Shut Down
 

 

 

AD10-H832AB-T-TR-230202V2649


 


How to Flash Scatter Rom:

Step 1: Download And Extract With Winrar The Stock Rom On Your Computer.

Step 2: After Extracting You Will Find The Firmware File, SP Flash Tool, Driver And Instruction Manual.

Step 3: Install The USB Drivers.Skip If Drivers Are Already Installed On Your Computer.

Step 4: Open The SP Flash Tools And Load The Scatter File From The Firmware Folder.

Step 5: Connect Your Smartphone To The Computer Using The USB Cable.

Step 6: Click On Upgrade Or Download Button In The SP Flash Tool To Begin The Flashing.

Step 7: Green Sign Will Appear At The Screen And Device Will Successful Flash

*

Post a Comment (0)
Previous Post Next Post