How To Fix Samsung Galaxy J7 Pro SM-J730F  Touch Screen Problem. The Problem Is Galaxy J7 Pro Touch Screen Unresponsive Or Does Not Work After Update It To Android 8.1 Oreo.  It's Only Tested On J7 Pro SM-J730F But It May Be Work For SM-J730F


How To Fix Touch Not Work After Update
Touch Fix Only Flash By Odin No Need Twrp


How To Flash Samsung Stock Rom Using Odin Flashing Tool On Windows Pc
1. Firstly, You Need To Know That The Odin Flashing Tool Is Really Easy To Use, But It Only Works On The Windows Operating System. You Won’t Get The Flashing Tool To Load On a Mac Or Linux Computer. It Doesn’T Really Matter What Version Of The Windows Operating System That You’re Using As Long As It Is Something Above Windows XP.

2. Download And Install The Samsung USB Drivers On The Computer If You Don’T Have Them Already.

3. Download The Samsung Stock ROM From The Links Above Directly To The Computer. Extract The File By Right Clicking On It And Choosing The Option To Extract. When You Do, You’ll See The Tar.md5 File Inside. That’s The File You’ll Be Using To dDo The Flashing.

4. Download The Odin Flashing Tool. It Doesn’T Really Matter What Version, But The Latest Is The Most Up To Date So Grab That One. Extract The Odin File And Then Double-Click On The Odin Executable File That Is Found From Within The Odin Folder After Extraction. You Should Now Have The Odin Interface Open On The Computer And Waiting For You To Connect To It.

5. Boot the Samsung Mobile Device Into The Download Mode By First Powering It Down And Then Rebooting By Holding The “Volume Down + Home + Power” Keys At The Same Time.

6. A Yellow Warning Triangle Will Come Up On The Device’S Display. At This Time You Need To Press The “Volume Up” Button. You’ll Then See The Device Getting Into The Download Mode. It’S Then Ready For The Flashing.

7. When In Download Mode, Connect The Samsung Mobile Device To The Computer With The USB Cable.

8. If you Have Installed The USB Drivers Correctly, The Odin Flashing Tool Should Detect Your Device. You Can Tell This By Observing The ID COM Port Lighting Up With A Color, Usually Yellow Or Blue.

9. After The Device Is Picked Up By Odin, Click On The “PDA” Or “AP” Button, Depending On What Button Your Version Of The Odin Flashing Tool Has.

10. Navigate To The Stock ROM Folder And Upload The Tar.md5 File To This Location In Odin.

11. Without Changing Any Of The Default Settings, Click On The “Start” Button In Odin, And The Flashing then begins.

12. Wait Until Odin Shows A “Pass” Message Before Disconnecting Your Device.


Post a Comment
Previous Post Next Post